The specialist for thin façade panels, such as HPL and fibre cement.

Zykon-Panel anchor FZP II T PA

The concealed fixing solution for thin façade panels, such as HPL, fibre cement and solid surface panels. Use in conjunction with clasps systems on façades or with other attachments.

Varijante proizvoda

Nedlastning av bilde

Varijante proizvoda

Odobrenja / Izveštaji o ispitivanju

5 Varijanta(e) proizvoda

min. platetykkelse

Forankringsdybde

Total lengde

Ankerlengde spredt

Remaining thread length

Gjenge

Legenda = Dostupna dozvola— = Dozvola nije dostupna

Pregledano 5 od 5 varijanti

Fordeler

The anchor’s short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.

Funksjon/montering

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Installation FZP II T PA

1 / 4

ETA-godkjenning
min. platetykkelse	8 mm
Forankringsdybde	5 mm
Total lengde ( l )	18,5 mm
Ankerlengde spredt	7,5 mm
Remaining thread length	11 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962362053

ETA-godkjenning
min. platetykkelse	8 mm
Forankringsdybde	5 mm
Total lengde ( l )	20,5 mm
Ankerlengde spredt	7,5 mm
Remaining thread length	13 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962362060

ETA-godkjenning
min. platetykkelse	8 mm
Forankringsdybde	6 mm
Total lengde ( l )	18,5 mm
Ankerlengde spredt	8,5 mm
Remaining thread length	10 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962168471

ETA-godkjenning
min. platetykkelse	10 mm
Forankringsdybde	8 mm
Total lengde ( l )	22,5 mm
Ankerlengde spredt	10,5 mm
Remaining thread length	12 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962168495

ETA-godkjenning
min. platetykkelse	12 mm
Forankringsdybde	10 mm
Total lengde ( l )	21,5 mm
Ankerlengde spredt	12,5 mm
Remaining thread length	9 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962168518

Zykon-Panel anchor FZP II T PA

Varijante proizvoda

Prednosti / Opis proizvoda

Prijava i odobrenje

Uputstvo za montažu

Dokumenti za preuzimanje