The adjusting undercut anchor made of A4 stainless steel for natural stone.

Zykon-Panel anchor FZP II SO AL

The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Produktvarianter

Nedlastning av bilde

Produktvarianter

批准/测试报告

5 个产品型号

min. platetykkelse

Forankringsdybde

Total lengde

Ankerlengde spredt

Remaining thread length

Gjenge

说明 = 可用认证— = 不可用认证

可查看 5 个型号中的 5 个

Fordeler

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Funksjon/montering

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP II SO R/AL - stand-off

1 / 6

ETA-godkjenning
min. platetykkelse	20 mm
Forankringsdybde	12 - 16 mm
Total lengde ( l )	30 mm
Ankerlengde spredt	21 mm
Remaining thread length	9 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112559

ETA-godkjenning
min. platetykkelse	20 mm
Forankringsdybde	12 - 16 mm
Total lengde ( l )	33 mm
Ankerlengde spredt	21 mm
Remaining thread length	12 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112566

ETA-godkjenning
min. platetykkelse	30 mm
Forankringsdybde	15 - 21 mm
Total lengde ( l )	38 mm
Ankerlengde spredt	26 mm
Remaining thread length	12 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962260984

ETA-godkjenning
min. platetykkelse	30 mm
Forankringsdybde	15 - 21 mm
Total lengde ( l )	43 mm
Ankerlengde spredt	26 mm
Remaining thread length	17 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112573

ETA-godkjenning
min. platetykkelse	30 mm
Forankringsdybde	15 - 25 mm
Total lengde ( l )	43 mm
Ankerlengde spredt	30 mm
Remaining thread length	13 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Seismic-godkjenning	C1 / C2
System	—
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962121193

Zykon-Panel anchor FZP II SO AL

Produktvarianter

Fordelene / Produktbeskrivelse

Søknad og godkjenning

Monteringsanvisning

Dokumenter for nedlasting