Fixed point clasp for ATK 103 P20 or S20 with hole 7 mm and EPDM.
The fixed point clasps of the BWM horizontal subframe system ATK 103 are made of an open C-profile and represent the geometric counterpart to the ATK 103 horizontal profiles. This combination allows the façade panels, which are fastened with undercut anchors, to be suspended quickly and efficiently. In addition to the dead load of the façade panel, the fixed point clasps also absorb wind loads proportionally and transfer these to the horizontal profiles. Thanks to the hole on the upper side, the clasps can be adjusted with an additional adjustment screw. The fixed point is created by adding the associated U-profiles.
