The suspension anchor with the fischer Vertical Solution for natural stone façade panels.

Zykon-Panel anchor FZP II VS

The concealed stand-off installation solution using undercut anchors for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses and create a flat façade surface by stand-off installation anchors.

Produktvarianter

Nedlastning av bilde

Produktvarianter

Zulassungen / Prüfberichte

3 Produktvarianten

min. platetykkelse

Total lengde

Gjenge

Diameter

Undercutdiameter

Antall pr. pak

Legende = Zulassung vorhanden— = Zulassung nicht vorhanden

Gesehen 3 von 3 Variante(n)

Fordeler

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Funksjon/montering

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate panel thickness tolerances helps create a flat façade surface.
Suspension brackets designed based on a lock and key principle are also used during installation.

Installation

1 / 6

ETA-godkjenning
min. platetykkelse	20 mm
Total lengde ( l )	25,5 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112580

ETA-godkjenning
min. platetykkelse	30 mm
Total lengde ( l )	30,5 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112597

ETA-godkjenning
min. platetykkelse	30 mm
Total lengde ( l )	34,5 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112603

Zykon-Panel anchor FZP II VS

Produktvarianter

Fordelene / Produktbeskrivelse

Søknad og godkjenning

Monteringsanvisning

Dokumenter for nedlasting