The adjusting carbon fibre-reinforced undercut anchor for natural stone.

Zykon-Panel anchor FZP II SO Carbon

The concealed stand-off installation solution using carbon fibre-reinforced plastic undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses to create a flat façade by using stand-off installation anchors.

Produktvarianter

Nedlastning av bilde

Produktvarianter

Zulassungen / Prüfberichte

4 Produktvarianten

min. platetykkelse

Total lengde

Gjenge

Diameter

Undercutdiameter

Antall pr. pak

Legende = Zulassung vorhanden— = Zulassung nicht vorhanden

Gesehen 4 von 4 Variante(n)

Fordeler

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Funksjon/montering

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Installation FZP II SO Carbon - stand-off

1 / 4

ETA-godkjenning
min. platetykkelse	20 mm
Total lengde ( l )	30 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962111644

ETA-godkjenning
min. platetykkelse	20 mm
Total lengde ( l )	33 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962111651

ETA-godkjenning
min. platetykkelse	30 mm
Total lengde ( l )	38 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962260977

ETA-godkjenning
min. platetykkelse	30 mm
Total lengde ( l )	43 mm
Gjenge ( M )	M8
Diameter	13 mm
Undercutdiameter	15,5 mm
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962111668

Zykon-Panel anchor FZP II SO Carbon

Produktvarianter

Fordelene / Produktbeskrivelse

Søknad og godkjenning

Monteringsanvisning

Dokumenter for nedlasting