Art.-No. 512144

fischer Zykon panel anchor FZP II 11 x 21 M6/SO/9 AL

Viktige funksjoner

Stand-off installation of panels with tolerances.
Compensation of panel thickness tolerances for highest visual requirements.
For all natural stones class I-IV.
Stress-free fixing enables high loads and use of thin panels.
Sleeve made of stainless steel.

The adjusting undercut anchor made of A4 stainless steel for natural stone.

Fordeler

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The anchor allows for higher pull-out loads, compared to commonly available systems.
Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Funksjon/montering

Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed in the conical undercut drill hole using stand-off installation.
The ability to compensate for panel thickness tolerances helps create a flat façade surface.

Montasjebilde 1

1 / 6

ETA Europeisk teknisk bedømmelse

pdf, ETA-11/0145

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469

Opprettet 09.06.2022

DOP - Ytelseserklæring

pdf, DoP No. 0307

Declaration of Performance for fischer Zykon-panel anchor FZP II

Opprettet 01.07.2022

DOP - Ytelseserklæring

pdf, DoP No. 0261

Declaration of Performance for fischer Zykon-panel anchor FZP II

Opprettet 11.01.2021

ETA Europeisk teknisk bedømmelse

pdf, ETA-22/0400

European Technical Assessment for fischer ZYKON FZP II for fixing Mirage facade panels

Opprettet 25.08.2022

DOP - Ytelseserklæring

pdf, DoP No. 0322

Declaration of Performance for fischer Zykon-panel anchor FZP II (for Mirage)

Opprettet 12.10.2022

Tilbehør

ETA-godkjenning
Forankringsdybde ( h_ef )	12 - 16 mm
min. platetykkelse	20 mm
Type	Abstandsanker
Total lengde ( l )	21 mm
Projection length	9 mm
Gjenge ( M )	M6
Diameter	11 mm
Undercutdiameter	13,5 mm
Materiale	A4
Hylse	A4
Antall pr. pak	250 St.
GTIN (EAN-Code)	4048962112559

fischer Zykon panel anchor FZP II 11 x 21 M6/SO/9 AL

Fordelene / Produktbeskrivelse

Søknad og godkjenning

Monteringsanvisning

Tekniske data

Dokumenter for nedlasting