Name: ATK601 Set Z-14/140-T60/80/3 gvz
Brand: fischer

Fixed/sliding point bracket set ATK 601 for push-through installation as rod-system.

Fordeler

Muliggjør ettermontering av ventilerte regnskjermfasader.
Ved hjelp av push-through og stand-off installasjon kan veggholderen også brukes i allerede isolerte underlag.
Kan benyttes for horisontale og vertikale systemer.
Passivhussertifiseringen garanterer bærekraftig og energieffektiv festing.
Ulike lastnivåer kan benyttes gjennom flere innfestingsdyp.

The ATK 601 wall holder set consists of an SXRL frame fixing, which absorbs the shear, tensile and compressive forces, as well as an add-on part and a T-piece. Depending on the orientation of the T-piece, a vertical or horizontal aluminum subframe system can be mounted on the wall holder.

Egenskaper

Anchor: Polyamid and stainless steel or zinc-plated steel
Attachment parts: Aluminum (e.g. EN AW 6063) and stainless steel

Applikasjoner

As a wall holder set for renovating existing façades
Consisting of a frame fixing anchor, as well as an attachment part and a T-piece
For load transfer into the building substrate of subframe systems in ventilated rainscreen façades

Byggematerialer

Vertically perforated brick
Aerated concrete
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid block made from lightweight and normal weight concrete
Solid brick
Solid sand-lime brick
Concrete ≥ C12/15

De details (bouwmaterialen, belastingen, etc.) van de beschikbare goedkeuring zijn van toepassing.

Certificering

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008
1281fa03

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Gecreëerd op 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Gecreëerd op 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Gecreëerd op 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Gecreëerd op 08.05.2024

Certificate

pdf, 1281fa03

Certified Passive House component for cool, temperate climate - ATK 601

Geldig tot 31.12.2025

Lengde	60 mm
Bredde	50 mm
Høyde ( H )	60 mm
Styrke	3 mm
Nominell diameter boremaskin ( d₀ )	14 mm
Min. borehullsdybde ( h₁ )	155 mm
Forankringsdybde	70 mm
Lengde L2	130 / 110 mm
Nyttelengde ved forankringsdybde 70 mm ( t_fix )	62 mm
Nyttelengde ved forankringsdybde 90 mm ( t_fix )	42 mm
Plugglengde ( l )	140 mm
System	—
Antall pr. pak	1 St.
GTIN (EAN-Code)	4048962398649

ATK601 Set Z-14/140-T60/80/3 gvz

Productomschrijving

Toepassing en goedkeuring

Montage instructies

Technische gegevens

Documenten om te downloaden